Debates about energy tend to focus on sources: natural gas versus solar, geothermal versus nuclear, which is cheapest, which is safest, and so on. But Americans experience energy through what it does. We use energy to do specific “jobs” – generating electricity, moving people and goods, making heat, and manufacturing products. Each job puts different demands on our energy system.
Those demands help explain why the U.S. energy mix looks the way it does – including why oil and natural gas still supply about three-quarters of our energy.
Let’s walk through the main energy jobs and how each one shapes which sources we rely on.
Different energy sources have varying degrees of versatility. Nuclear energy goes exclusively toward generating electricity; most petroleum goes to transportation, though about a quarter goes to industry as fuel or raw material. And natural gas is uniquely flexible, with its use spread across power plants, industry, and homes and businesses.1

Energy consumption by source and sector, 2024, in quadrillion Btu. Source: EIA.
When people talk about energy, it’s often in the context of electricity. And for good reason: generating electricity consumes more of the country’s primary energy than any other single activity, about 35%.2 Power plants produce electricity from energy sources such as natural gas and nuclear, and the grid delivers it to homes, businesses, and factories. In this way, the power sector is a middleman: the electricity it makes is ultimately used by other sectors.
In 2025, natural gas generated about 41% of U.S. utility-scale electricity, followed by nuclear (18%), coal (17%), wind (11%), solar (7%), and hydropower (6%).3
One of the main challenges in the electricity sector is timing. Demand for electricity rises and falls throughout the day and across the seasons – for example, increasing in the summer as air conditioners run, in the winter as homes switch to heat, and often in the evening as people get home from school and work. The grid can store only a small amount of energy, so supply has to match demand every second in order to keep electricity reliable and available. On this front, not every energy source is equally capable. Wind and solar produce power when the wind blows and the sun shines. Nuclear plants are reliable, but typically run best at a constant output. Natural gas and hydropower plants can ramp their output up and down quickly to meet demand.
As a result, electricity systems often rely on a combination of energy sources, with nuclear often providing the steady base, wind and solar contributing when available, and natural gas ramping up and down to fill gaps. The chart below shows how this can play out in many parts of the country,4 using data from one spring day in New England. At midday, solar panels cover much of the region’s demand, and natural gas generation falls. In the evening, as the sun sets and demand rises, gas ramps back up to fill the gap.

Source: ISO New England.
The right generation mix also depends on geography, as every region has different resources and infrastructure. In some parts of the country, natural gas supplies nearly all electricity, while in others hydropower, coal, nuclear, or wind leads.

Source: U.S. Environmental Protection Agency.
Building and running the grid means balancing a number of tradeoffs: cost, reliability, and price volatility, to name a few. No single source meets every need in every situation, and no single mix works everywhere.
Transportation is the largest single end use of energy in the U.S., accounting for more than a third of the total. Petroleum products such as gasoline, diesel, and jet fuel supply nearly 90% of the sector’s energy. Biofuels and natural gas make up most of the rest.5 These petroleum products are made in refineries – gasoline, diesel and other distillates, and jet fuel represent more than 80% of the output from a barrel of crude oil.

Source: EIA.
The main reason oil dominates the transportation sector is weight. Cars, trucks, planes, and ships have to carry their energy with them, so energy density is enormously important. While jet fuel holds about 12,000 watt-hours per kilogram, today’s lithium-ion batteries hold just a few hundred.
For passenger cars, batteries’ comparatively low energy density can be manageable. Many daily trips fit within an electric vehicle’s range, and cars spend most of the day parked with time to recharge, which is why passenger vehicles are where electrification has been most successful. For longer or heavier transportation, however, the density gap is very hard to overcome. To take one example: a Boeing 777 can take off with about 145 tonnes of jet fuel on its longest routes. By comparison, storing the same energy in today’s batteries would require a pack weighing multiple times the plane’s roughly 350-tonne maximum takeoff weight.6 Shipping and long-haul freight run into the same physics.
Industry – steel mills, cement and chemical plants, food processors, and beyond – uses about a third of end-use energy, including the electricity it buys. Natural gas is the sector’s largest energy source, followed by petroleum.7 Much of that energy goes to heat.
Many industrial processes need very high temperatures. Cement, steel, glass, and ammonia production all require precise, sustained heat – often at upwards of 2,500 degrees Fahrenheit. Natural gas is well suited to this work because it burns hot, is relatively inexpensive, and can be used on demand. Electricity can also play a role. Electric arc furnaces, for example, are used to melt scrap steel, but fuel remains the practical choice for most high-temperature processes.8
Not all oil and gas gets burned. Some of it is converted into raw material for the products that we use every day. In U.S. manufacturing, about a third of the energy consumed is used as raw material, or feedstock, for products like plastics and chemicals, rather than burned as fuel.9
Fertilizer is one major example: natural gas is the primary feedstock for the fertilizer that supports the food supply for roughly half the world’s population.10 Oil and natural gas liquids, meanwhile, supply the building blocks for the plastics and chemicals in thousands of everyday products, from keyboards and clothing to lip balm and smartphones.
Add up these jobs, and oil and natural gas supply about three-quarters of U.S. energy: petroleum about 38% and natural gas about 36% as of 2025.11 That follows from the jobs themselves. Oil and gas are energy dense enough for heavy, long-distance transportation, burn hot enough for industrial processes, and are chemically useful as raw materials. Few other sources check as many of these boxes.
As a result, oil and natural gas have led U.S. energy use for decades.

U.S. energy consumption by source, 1980–2024. Source: EIA data.
These same jobs and characteristics show up in our own energy use. Homes and businesses account for a little more than a quarter of U.S. end-use energy. About half of it arrives as electricity, so when we flip on a light or charge our phones, we’re drawing from the electricity generation mix. Most of the rest is natural gas and other fuels burned on site for heat – in our furnaces, water heaters, and stoves.
That’s why “what’s the best energy source?” doesn’t have a single answer. Each job comes with its own constraints, and those constraints determine which energy does the work. In other words, the job picks the energy.